Select Page

COBRA KING 36 m luxury gullet | 38m | €2,290,000

Cobra King is a 38 m LOA (34 m on deck) luxury Gullet with unique design that combines traditional and contemporary elements.

She is now offered for sale from her first owner. 

Read more

Built in 2005 in Turkey as a custom-built project and refitted in 2020 (watch video)

Cobra King has 5 cabins for 10 guests and vast areas for relaxing, both indoor and on deck.

Powered by 2 X 440 hp MAN engines (Rebuilt in 2020) and 2 Kholer Generators (Replaced in 2016)

She has Ketch rigging with 552 sqm sail area. Under sails she can make 10 knots + in moderate winds.

The yacht is kept in superb condition and fully equipped as commercial vessel to be operated as a charter luxury yacht or for private use.

For more info contact:

Eliad Hagilady

+ 90 5439538678

Photo Gallery


Main Features

L.O.A.  38 m Cabins  5
Year  2005 Cruising Speed  12 knots
Shipyard  Bodrum Shipyard Main Engines  2 X MAN 440 hp
Hull Material  Epoxy Laminated Mohagany Riging  Ketch
Guests  10 Class  Built to RINA roles

Specification List

Main Features

Builder: Custom Project in Bodrum Turkey

Hull Material:     Epoxy Laminated Mahogany

Built/Refit:         2005/2020

Length: 38.60 m.

Beam:   8 m.

Draft:    2.75 m.

Hull material:    Epoxy Laminated Mahogany

Engines:             2 X 440 HP MAN

Cruising Speed   10 (under Sail) – 11 knots – under power

Fuel 5,000 Liter

Water 10,000 Liter

Displacement     132 tons

Range:  800 NM

Rigging Ketch

Total Sail Area   552 sqm

Guest areas and Accommodation

Aft Deck:

Large sun pad area for 10 guests

Dining table for 12 persons

Sound system I-Pod compatible with remote control

Front Deck:

Lounge area with table set up for 10 persons

Sound system I-Pod compatible with remote control


Dining Table for 12 persons

Lounge area with sofa

Samsung 55” Led TV, Movie Database, PS4, Satellite TV

Master Cabin:

1 x Full beam owner’s cabin front with large king size bed, en suite bathroom with separated toilet

Samsung LCD TV, Movie Database, Satellite TV

Guest Cabins:

2 x large double guest cabins with en suite bathroom

2 x triple guest cabins with en suite bathroom

Samsung LCD TV, Movie Database, Satellite TV

Crew Accommodation

1 x Captain’s cabin with a single bed, bathroom

1 x Crew Cabin with a single bed and bathroom

2 x Crew Cabins with 2 single beds and bathroom


Engines 2 x MAN 440 hp D2866LXE40 (rebuilt 2020)

Fuel Consumption          35 liter per hour each engine at 10 knots

Generators         2 x ONAN 27,5 Kw (installed in 2015)

Consumption     5 liter per hour each generator

1 x Water Maker, 250 lt/h each

Gear Box:           Twin Disc, Reduction: 3,5/1

Shaft:    2 pieces, Dia. 90mm, Length: 5300mm(renewed in 2020)

Propeller:           2 pieces, Dia: 1000mm, 3 Blades, Material: Mn-Bronze

Rudder:              Wood Rudder Blade & Stainless-Steel Rudder Stock dia. 120mm

Bilge Pump:       5 x TMC Pumps

Emergency Fire & Bilge Pump:   Diesel Pump TMC

Boiler:   Arçelik 100 lt x 2 Stainless Steel

Fresh Water Pressure System:    TMC x 2 (380V & 24V)

Grey & Black Water Pump:         Domak 220 V

Blower (Extraction):       2 x Electrotechnics 220 V

Blower (Ventilation):      2 x Electrotechnics 220 V

Fire Detection Unit:        Type Approved with 8 zones.

Air Condition System: Webasto,max. 200.000 Btu chiller with 3 compressors (renewed in 2019)

Water-Maker Unit:         1 x 250 lts/h each

Sewage Treatment Unit:             Tecnicomar, Ecomar 16 – 6100lt/day – installed in 2020

Bow Thruster:   Powered by electric system with 4 batteries

Electric Unit:      2 Anchor Windlasses, 1 Passarella

Fuel Capacity     5,000 liters

Fresh Water    10,000 liters

Gray Water       2,250 liters

Black Water     2,000 liters

Inverters       Victron Energy 24/5000 (installed in 2020

Gangway:           Custom made Manuel stainless steel and teak covered

Data Hydraulic Steering Gear

Watertight Doors:           5 pieces


2 Fresh Water pumps (TMC 24V and Leo 220 V)

1 Macerator pump (24 volt for black and gray water discharge)

5 Separate submersible TMC bilge pumps for each compartment

Fire Fighting Pump, (Leo XJM60LC)

2 Water heaters (Arçelik)

Smell filters

1 Sewage treatment unit, (Tecnicomar) – installed in 2020

Air Outlet with 2 blowers & dampers (automatically stop from Saloon) & 1 natural vent trunk

Air Inlet with 1 blower & dampers (automatically stop from Saloon)

Sails and rigging

2 masts, Aluminum, Fore 36m, Aft 30m by Velena Mast Co. ( refited in 2021 with all riggings )

Booms Park Avenue by Velena Mast Co.

Sail Area: 552 sq m

Storm Sail

2 Manuel Furling Systems (Profor)

5 Winches, Harken Power Ratio 53, 2 speed manuel

2 Winches, Harken 380 Power Ratio, 2 speed manual

Navigation Equipment

Serenity 212 Tr I-Ais Class B

JRC Jma 2344 Radar

JRC Jlr 4330 E GPS

Icon Ic M401 Vhf

Raymarine St60 Wind System

Raymarine St60 Tri Data For Deep Sounder And Speed

Raymarine St 7001 Smart Pilot

Lorenz World Map Lcd 11 Sun

Intellian Sat Tv Antenna With 27” Diameter Dome


Crew mess area

1 Arçelik Washing machine

90 cm Franke electric Glass cooker

90 cm Siemens electric Oven

2 Large Marine Custom fridges

2 Ice maker machine

1 Arçelik dish washer

1 Large Marine Custom freezer

Propeller and shaft system

2 Propeller dia. 1000mm Ünlü Propellers

2 Propeller and stud, bronze

2 Stainless steel shaft, dia. 90mm

2 Steel / flexible coupling for shaft – engine connection

Steering and mooring system

Rudder mechanism DATA hydraulic system

1 Rudder blade made of wood

2 Anchors (both of them is stainless steel with 150 m. galvanized (in 2021) chains)

Safety and fire protection

Powder type fire extinguisher tubes in all the corridors, saloon and wheelhouse.

Fixed semi-automatic CO2 system fort the engine room

1 non-fixed type Powder tube

1 CO2 tube in the engine room

1 Fire blankets

1 Fireman outfit

2 Life Rafts, each of them having capacity for 10 person (SOLAS ‘A’ Pack)

22 Life Jackets

Emergency lights for escape routes

12 Rocket hand flares

6 orange smokes

1 Line throwing

1 Aldous lamp

Hydrants and hoses

2 fire axes (1 fore deck, 1 aft deck)

2 life buoys

2 line & lights for the forward & aft decks

Hull construction

The hull and deck construction material is built via a mastered wooden lamination method. Shell planking of 4 layer of mahogany. Frames are also made of Mahogany. Webs are made of Sapelli wood. The superstructure is made of Mahogany; Deck is covered with 15mm Teak planked.

First Layer: Mahogany stripes (3.5 cm thick, 6 cm wide) which are prepared to click together (like parquet) are applied on horizontally. Where it comes to frames (which are in every 50 cm) we use nails and Epoxy glue to combine the planking and frames.

Second Layer: On top of the first layer Epoxy glue is applied. On top of this Mahogany stripes (1 cm thick, 8 cm wide) are applied on 45 degree to first layer. Staple is used to give strengths.

Third Layer: On top of the second layer Epoxy glue is applied. On top of this Mahogany stripes (1 cm thick, 8 cm wide) are applied on 135 degree to first layer. Staple is used to give strengths.

Fourth Layer: On top of the third layer Epoxy glue is applied. On top of this Mahogany stripes (1 cm thick, 8 cm wide) are applied horizontally to the yacht. Staple is used to give strengths.

For additional info contact:


Eliad Hagilady

+ 90 543 953 8678

Subscribe To Our Newsletter

Join our mailing list to receive the latest news and updates from our team.

Your Email

You have Successfully Subscribed!